Tagged: 

Viewing 20 posts - 1 through 20 (of 23 total)
1 2
  • Author
    Posts
  • January 28, 2015 at 8:35 pm #50718
    veetam
    Participant

    In the Featured Slider #
    I’ve tried all 4 options: Featured Post Slider, Featured Page Slider, Featured Category Slider and Featured Image Slider. Without any success!

    Sometimes, It only shows the first image, the others (3) are blank? But right click on blank space to show image in new tab works?

    Other times they are all blank, even if I refresh the page, and even if I reset it to the demo mode?

    Plus, in Appearance => Customize => Featured Slider Options => Featured Slider Type
    I can’t even see my original images, unable to bring any modifications…

    What am I doing wrong?

    Veetam

    January 28, 2015 at 10:06 pm #50726
    Sakin
    Keymaster

    @veetam: After you choose the slider type. You need to add in the slider details.
    For Example: if you choose Featured Image Slider from “Appearance => Customize => Featured Slider Options => Featured Slider Type” then you need to Click on “Select Image” and upload the images for your slider. If you choose Featured Page Slider, then you need to select pages. But when you choose Featured Page slider, make sure you have added in Featured Image in those pages. Same with Featured Post Slider and Category Slider.

    The original image that come with the slider is Featured Demo Slider. This is just for demo purposes. After selecting the featured type and adding in the details, send me your site URL and then I will check in.

    January 28, 2015 at 10:45 pm #50729
    veetam
    Participant

    I get it, but still doesn’t work, also after inserting 4 featured images, in featured images there is only the possibility to change No of images, I can’t select images anymore?
    I have just reset to demo mode, here is the link : http://vitreteinte.ca/
    Tell me if you see both images?
    On the page I get the first one only, click the arrow and you will get a blank image, try the arrows and now they are both blank?

    Thanks for helping

    January 28, 2015 at 11:16 pm #50730
    veetam
    Participant

    About that in featured images there is only the possibility to change No of images, I can’t select images anymore?

    See this link for screenshot of the problem…

    http://vitreteinte.ca/slider.jpg

    January 28, 2015 at 11:34 pm #50731
    veetam
    Participant

    Problem also with the promotion Headline, it simply does not work!

    Check link for screenshot from panel

    http://vitreteinte.ca/headline.jpg

    January 29, 2015 at 3:05 am #50738
    veetam
    Participant

    Sorry, after 6 hours, this site is under conctruction, I have to reset de website to maintenance mode. So the links are now unavailable.

    January 29, 2015 at 8:54 am #50749
    Sakin
    Keymaster

    @veetam: Are you using Latest version of WordPress and Theme. Can you let me know about it. Looking at the Screenshot, it looks like you are using older version of WordPress and Theme.

    January 30, 2015 at 3:24 pm #50820
    Young
    Participant

    Hi @Sakin, I’m facing the same problem with @veetam as well.

    I just bought the catchbase PRO. Uploaded 3 images into the Featured image slider, but only 1 image appear.

    Ive also do a screen video recording to give u a better understanding of the issue. http://youtu.be/xZGuKMA9qVk

    Please advise. Thanks.

    Young

    January 30, 2015 at 5:31 pm #50821
    Young
    Participant

    Hi @Sakin, prior to the Featured image slider issues, I can’t get the Featured Post Content to work as well. Only the description words came out, not the post.

    Been cracking my head troubleshooting ever since i purchased this theme several hours ago. It shouldn’t be that difficult to use isn’t it?

    Awaiting for your advise.

    Thank you very much.

    Young

    January 30, 2015 at 11:51 pm #50836
    Sakin
    Keymaster

    @Young: Can you reply my email I have just send you. I need to check more in details.

    January 31, 2015 at 7:43 am #50844
    Young
    Participant

    Hi @Sakin, Thanks for your response.

    I didn’t receive your email. Could u kindly send it again to “[email protected]”.

    Thanks & Appreciate.

    Young

    UPDATE: Hi Sakin, I’ve replied your email. Please take a look. Thank you.

    January 31, 2015 at 6:09 pm #50857
    Sakin
    Keymaster

    @Young: Thanks and I have update it. Can you check it now.

    February 1, 2015 at 6:17 pm #50893
    Kimmo
    Member

    Hi @Sakin!

    I bought this theme yesterday and installed it on WP 4.1. My problem is exactly same looking than with Young. Four images, only first one shoving when reloading page and after that just blanks. After a while of trying some things I noticed that slider starts with second slide (the second ball is active), then goes to first one and after that normally 1st, 2nd, 3rd etc.

    I installed WP with Installatron installer but don’t get how it could affect.

    My server is using PHP 5.4, MySQL 5.6 and Apache 2.4.

    Appreciate your help!

    February 1, 2015 at 9:05 pm #50904
    Sakin
    Keymaster

    @Kimmo: I have just email you. Can you reply me there.

    February 7, 2015 at 9:12 pm #51228
    Young
    Participant

    @Sakin hey, everything is working awesome now. Thank you very much for your help!

    February 12, 2015 at 3:40 pm #51553
    4iMEDIA
    Member

    Hello,

    I’m sorry to answer in this thread, but I have the same problem in der Clean Version. How did you make it work?

    Thx a lot.

    Jana

    February 13, 2015 at 9:28 pm #51674
    Sakin
    Keymaster

    @4iMEDIA: It should work fine. Which version are you suing it. Ok I will email you to check your server.

    March 7, 2015 at 12:35 am #52842
    Naomi
    Member

    Hi Sakin

    I am using Catch Base. I can’t make the slider function work: I seem to have only “featured page” and “demo” options. When I use “featured page,” I get the title and site content, along with the featured image.

    I just want a few featured images, without page information (or without being part of a page) for my slider. How do I make that work?

    I am using the free version of Catch Base.

    Thanks for your help!

    March 7, 2015 at 12:40 am #52844
    Sakin
    Keymaster

    @Naomi: You need to create more pages. So, that you can add in more image as one page will have one featured image. Featured Page Slider will link to page if you want independent image then you need to use Featured Image Slier which is there only in Catch Base Pro theme. See more info about Catch Base Pro at http://catchthemes.com/theme-instructions/catch-base-pro/

    May 13, 2015 at 5:22 pm #57618
    aj
    Member

    I have the same problem. I have the latest version of WP and the theme catch base pro (2.4). I have uploaded 6 pictures in a image slider.
    What to do?

  • Author
    Posts
Viewing 20 posts - 1 through 20 (of 23 total)
1 2
  • The topic ‘Blank Featured Slider #’ is closed to new replies.