[Heinz]

Hello Skandha
Now I have documented all of the errors. You can check it out here: https://vah-test.ch/doku2/. I hope that you can help me now, because my site is a little unprofessional.
Thank you for your help.
With kind regards
Hene

[Heinz]

Hello

Now I’ve tested the alignment settings of the slider. It would just be better if an image center could be determined. But you can live with this variant. But what definitely doesn’t work is the alignment in the vertical axis. If the picture is not displayed in full height, I want to be able to determine the orientation. In picture 7, if I don’t see the lower part, this picture is worthless.

Can you help me here.

Many Thanks.
Kind regards
Heinz

[Heinz]

Hello Skandha

Many Thanks. It almost works. I can only adjust the positions of one picture. In the second picture, the first line is displayed in red and the command is not executed. I copied your lines 1: 1.

Thank you for your help.
With kind regards
Heinz

[Heinz]

Sorry, it works. I didn’t get a clip. Everything great!!!! Many Thanks 🙂

[Heinz]

Hello Skandha
Sorry, I haven’t done the movie yet. I’m on vacation at the moment and I am often out and about taking photos.
But I tried a little bit more. You can select the two checkboxes under “FullPage Options” under “Scroll Bar Options”. Then the scrolling does not lock after every topic, but the presentation is different. Not only is a scrolling list displayed, but the background images, especially on the iPhone, are displayed differently. Now my question, is it not possible to set the scrolling without snapping using CSS instead of the two checkboxes? But without a scroll list and without changing the display of the background images?
Thank you for your help.
Heinz

[Heinz]

Hello Skandha
For me the display of the pictures is random, the icing on the cake. But it is much more important that the arrangement of the images works perfectly. According to my open ticket “https://catchthemes.com/support-forum/topic/bildzentrum-festiegen” If that doesn’t work, the whole website is not suitable for me. I want to show pictures and do it professionally.
Thank you for your help.
With kind regards
Heinz

[Heinz]

Hello Skandha
Thank you for your question, I have now refined my documentation. It should be more understandable now. https://vah-test.ch/doku/
With kind regards
Heinz

[Heinz]

Hello
Here I have 4 examples from my Featured Slider that should be suitable. Which, of course, would be even better if, when aligning, I could not only tell you where it should be aligned, but also give a number indicating how big the margin is. For example:
Horizontal alignment: right margin 20
Vertical alignment: top edge 5

Here are my alignment requests:

Image 1:
Horizontal alignment: centered
Vertical alignment: centered

Picture 2:
Horizontal alignment: right
Vertical alignment: top

Picture 3:
Horizontal alignment: centered
Vertical alignment: below

Pic 7:
Horizontal alignment: right
Vertical alignment: below

Thank you for your help.
With kind regards
Heinz

[Heinz]

Hello
For example, I want to align the first slider image to the left, align the second slider image to the right, and align the third slider image at the bottom. Unfortunately, I cannot program but accept the many commands, assuming that I can address each slider image individually.
Thank you for your help
Heinz

[Heinz]

Hello Skandha
I have documented it here
https://vah-test.ch/doku/
Thank you for your help.
Best regards
Heinz

[Heinz]

Hello Skandha
Thanks for the tip. Yes is a possibility and helps for the picture with the bird. But now it aligns all images to the right. Depending on the picture, I don’t want it that way. Therefore the center point should be able to be determined in every picture. Can I set each image individually with CSS? In Koken, a dot can be marked on the picture with the mouse and this is then noted as the center.
Best regards
Heinz

[Heinz]

Hello Skandha
I would very much like to rate you, but you always have to register there and cannot register there. I don’t know what kind of password that is.
Kind regards
Heinz

[Heinz]

Hello Tikaram
Thank you for your help. The problem could be solved with settings in the galleries.
Best regards
Heinz

[Heinz]

Hello Tikaram
Yes, that was my idea and it works too. But I can have the page with the gallery generated by NextGEN galleries using the album function, which saves a lot of work. It only works once when I click on Gallery and then the path disappears. Click once on my gallery Bern, then in the path above on Galleries and then on Galerie Bern. Then you see what is mine.

[Heinz]

Hallo Skandha
Vielen Dank, funktioniert bestens.
Freundliche Grüsse
Heinz

[Heinz]

Hello
I write naoc exactly what I want. On the main page (https://vah.ch/#service-section) I start the gallery Bern, for example, under Gelerien. Home> Bern is now at the top of the navigation path. But I want drt Home> Galierien> Bern to be displayed. If I then click on galleries, I come back to https://vah.ch/#service-section. So I would have intelligent navigation.
Thank you for your help.

[Heinz]

Hello Skandha
Thank you, it worked. I thought the sorting is according to the page index. It’s that easy. Thanks again.

[Heinz]

Can you still help me here? I saw that the order of the pages can be determined in the settings. But unfortunately it doesn’t sort according to this, it sorts according to the page ID. Surely there is also a CSS?
Many thanks.

[Heinz]

Thank you, that’s how it has to be. It works great! 🙂

[Heinz]

Thank you for your help. I will still test which variant is better

[Author]

Posts